Metacaulk 835+, 10.15 .oz Cart
Metacaulk 835+ is a 1-component, fire-rated elastomeric silicone sealant for through penetration firestops. Prevents flames/smoke/gas/water spreading through penetration openings. Silicone based - use in systems where dynamic movement is expected.
- STC rating 55 as well as FBC System Compatible- indicates that product has been tested, and is monitored on an ongoing basis to assure chemical compatibility with FlowGuard Gold, BlazeMaster and Corzan pipe and fittings.
- A single component penetration sealant system - no mixing or required additives needed.
- Flexible and non-slump formula. Neutral, moisture cure and low odor. Excellent moisture resistance. Protected in wet & dry stages against mold growth with a combination of biocides.
- D O T Classification is not regulated.
- Use in interior or exterior expansion, contraction and control joints. Use in exterior and interior penetrations. Available in 2 grades: caulk grade & self-leveling. Applied with a conventional caulking gun, trowel or with pumping equipment.
Seals wall/floor penetrations for electrical, plumbing & telecomm systems. Prevents spread of fire through fire-rated gypsum wallboard partitions, concrete block or concrete walls/floors. Non-Slump formula used in vertical/horizontal settings.
|Case Weight (lbs) :||12.28|
|Case Height (inch) :||10.00|
|Case Length (inch) :||6.38|
|Case Width (inch) :||8.19|
|Brand :||Metacaulk 835+|
|Recommended Use :||EMT, Insulated and uninsulated steel pipe, Construction and control joints, Expansion joints|
|Shelf Life :||2.00 YRS|
|Application :||Seals wall/floor penetrations for electrical, plumbing & telecomm systems. Prevents spread of fire through fire-rated gypsum wallboard partitions, concrete block or concrete walls/floors. Non-Slump formula used in vertical/horizontal settings.|
|Fin/Blade Spacing :||.000|
|Fin Degree :||0|
|Screw Holes :||0|