Break-Out Cans, 1 lb.
Break-Out is a high-temperature anti-seize & lubricant. Made of polished micro-fine copper flakes & graphite particles in high-efficiency non-volatile base, it's the ideal for lubrication, corrosion protection & easy break-out at extreme conditions.
Features
- Ideal for outdoor use - resists water wash off and Contains no lead
- Exceeds military specification MIL-PRF-907F
- Easy break-out without galling threads from -65°F (-54°C) to 1800°F (982°C)
- Contains extreme pressure additives and high temperature, corrosion resistant grease to resist rust in harsh environments
- Will not run, drip, or settle out and Creamy consistency for easy application
May be used at temperatures ≤1800° F (982°C). Should not use on stainless steel reaching temperatures over 550°F (288°C) or oxygen systems. For stainless steel over 550°F, use RectorSeal Copper-Rich. For industry use only by trained professionals.
| Case Weight (lbs) : | 15.28 |
|---|---|
| Case Height (inch) : | 5.00 |
| Case Length (inch) : | 10.13 |
| Case Width (inch) : | 13.00 |
| Brand : | Break-Out |
| Recommended Use : | Ideal for settings like turbines, superheat lines, shackles, hatch covers, pins & dies, sliding bearings, bolts/nuts/screws, bushings, pipe fittings, taps, valve stems, cylinders, boilers, furnaces, engines, autoclaves, reactors & heat exchangers. |
| UPC : | 021449734318 |
| Interleaved : | 10021449734315 |
| Shelf Life : | 2.00 YRS |
| Color : | BRONZE |
| Application : | May be used at temperatures ≤1800° F (982°C). Should not use on stainless steel reaching temperatures over 550°F (288°C) or oxygen systems. For stainless steel over 550°F, use RectorSeal Copper-Rich. For industry use only by trained professionals. |
| Fin/Blade Spacing : | .000 |
| Fin Degree : | 0 |
| Screw Holes : | 0 |